Commis Chef apprentice jobs
Sort by: relevance | dateMotor Mechanics Apprentice
Profile of Craft Core Skills Motor Mechanics The Motor Industry The work of a Motor Mechanic involves the servicing, maintenance and fault diagnosis of automobile and light commercial vehicle mechanical and electrical systems, vehicle component removal, installation or repair according to original manufacturers’ specification. At the end of the apprenticeship, the craftsperson will be able to demonstrate competence in the following skills: Servicing Read, interpret and carry out manufacturers’ instructions for all vehicle service, maintenance and repair procedures. Complete a vehicle report form. Fgas Describe the overall aim of Regulation No. 842/2006 of the European Parliament and of the Council of 17 of May 2006 in relation to the air conditioning systems of automotive vehicles (MACs). List the dangers to personal health and related safety regulations related to the refrigerant gas contained in mobile air conditioning (MAC) systems. Describe the location of possible leaks of refrigerant gas from an automotive air con unit. Engine Diagnose faults, dismantle and reassemble the engine and its ancillary components. Replace timing belts and chains. Use all recommended bolt tightening procedures. Electrical Read and interpret relevant electrical wiring diagrams. Use fault code reader to interrogate ECU memory and OBD system. Employ a logical and structured fault diagnosis methodology (use of diagnostic flow charts). Measure and interpret quantities of electrical current, voltage and resistance. Diagnose / resolve faults in starter, charging and lighting circuits. Remove / replace vehicle lighting components. Align headlamps. Fuel / Ignition Diagnose and resolve faults in electronically controlled fuel, ignition and emissions control systems. Evaluate exhaust emission levels with reference to NCT / DoT VTM test requirements. Transmission Diagnose faults in manual transmission units. Remove / refit manual transmission units. Diagnose faults in clutch assemblies. Remove / replace clutch components. Remove / replace driveshaft joints and bearings. Brakes Diagnose mechanical and hydraulic faults in the braking system. Remove / replace brake components. Employ manufacturers’ recommended service and bleeding procedures. Core Skills (cont’d) Specialist Skills Steering / Suspension Diagnose faults in steering and suspension systems. Remove / replace steering and suspension components. Align suspension and steering geometry. Balance wheels. Repair punctures. Bodywork Remove / replace bodywork components e.g. door locks, windows and regulators. Engine Carry out complete engine overhaul on automobile and light commercial vehicle petrol and diesel engines. Electrical Check operation of, diagnose any faults present, and return to original manufacturers’ specification: standard, multi voltage and high voltage systems, inter control module communication systems e.g. CAN, LIN, VAN and MOST networks, multiplex wiring, climate control, cruise control, theft deterrence systems, comfort systems e.g. electric windows and seat / steering adjustment, sunroof, and central locking. Fuel systems Check operation of, diagnose any faults present, and return to original manufacturers’ specification: high pressure petrol injection systems (e.g. GDI and MED Motronic) and high pressure diesel injection systems (e.g. common rail). Transmission Check operation of, diagnose any faults present, overhaul and return to original manufacturers’ specification: manual, automatic or hybrid transmission assemblies. Brakes Check operation of, diagnose any faults present, and return to original manufacturers’ specification: ABS and EHB (Electro Hydraulic Braking) systems. This includes ESP (Electronic Stability Program), TCS (Traction Control System), and ACC (Adaptive Cruise Control) systems. Occupant safety Examine, diagnose any faults present, and return to original manufacturers’ specification: vehicle occupant passive safety systems. This includes airbag, belt tensioner and rollover protection systems. Communication and Information Check operation of, diagnose any faults present, and return to original manufacturers’ specification: in car entertainment systems, telecommunication systems, vehicle information systems e.g. technical monitoring displays and GPS (Global Positioning System). Mobile Air Conditioning (MAC) systems. Discuss and demonstrate best practice for handling of Fgases storage cylinders, the safe recovery and disposal of Fgas. Perform full servicing of an air conditioning system of a motor vehicle to include: leak detection, recovery, vacuum and refill. Common Skills Specialist Skills Servicing Read, interpret and carry out manufacturers’ instructions for all vehicle service, maintenance and repair procedures. Complete a vehicle report form. NCT / DoT VTM Determine the condition of automotive vehicles to NCT / DoT VTM requirements. Engine Diagnose faults and return to original manufacturers’ specification: petrol and diesel engines and their ancillary components. Electrical Read and interpret relevant electrical wiring diagrams. Use fault code reader to interrogate ECU memory and OBD system. Employ a logical and structured fault diagnosis methodology (use of diagnostic flow charts). Measure and interpret quantities of electrical current, voltage and resistance. Diagnose / resolve faults in starter, charging and lighting circuits. Remove / replace vehicle lighting components. Align headlamps. Transmission Diagnose faults and return to original manufacturers’ specification: clutch system components, driveshafts and bearings. Brakes Diagnose faults and return to original manufacturers’ specification: brake friction linings. Steering Diagnose faults and return to original manufacturers’ specification: steering linkage and geometry settings. Bodywork Remove / replace bodywork components e.g. door locks, windows and regulators.
Motor Mechanics Apprentice
Profile of Craft Core Skills Motor Mechanics The Motor Industry The work of a Motor Mechanic involves the servicing, maintenance and fault diagnosis of automobile and light commercial vehicle mechanical and electrical systems, vehicle component removal, installation or repair according to original manufacturers’ specification. At the end of the apprenticeship, the craftsperson will be able to demonstrate competence in the following skills: Servicing Read, interpret and carry out manufacturers’ instructions for all vehicle service, maintenance and repair procedures. Complete a vehicle report form. Fgas Describe the overall aim of Regulation No. 842/2006 of the European Parliament and of the Council of 17 of May 2006 in relation to the air conditioning systems of automotive vehicles (MACs). List the dangers to personal health and related safety regulations related to the refrigerant gas contained in mobile air conditioning (MAC) systems. Describe the location of possible leaks of refrigerant gas from an automotive air con unit. Engine Diagnose faults, dismantle and reassemble the engine and its ancillary components. Replace timing belts and chains. Use all recommended bolt tightening procedures. Electrical Read and interpret relevant electrical wiring diagrams. Use fault code reader to interrogate ECU memory and OBD system. Employ a logical and structured fault diagnosis methodology (use of diagnostic flow charts). Measure and interpret quantities of electrical current, voltage and resistance. Diagnose / resolve faults in starter, charging and lighting circuits. Remove / replace vehicle lighting components. Align headlamps. Fuel / Ignition Diagnose and resolve faults in electronically controlled fuel, ignition and emissions control systems. Evaluate exhaust emission levels with reference to NCT / DoT VTM test requirements. Transmission Diagnose faults in manual transmission units. Remove / refit manual transmission units. Diagnose faults in clutch assemblies. Remove / replace clutch components. Remove / replace driveshaft joints and bearings. Brakes Diagnose mechanical and hydraulic faults in the braking system. Remove / replace brake components. Employ manufacturers’ recommended service and bleeding procedures. Core Skills (cont’d) Specialist Skills Steering / Suspension Diagnose faults in steering and suspension systems. Remove / replace steering and suspension components. Align suspension and steering geometry. Balance wheels. Repair punctures. Bodywork Remove / replace bodywork components e.g. door locks, windows and regulators. Engine Carry out complete engine overhaul on automobile and light commercial vehicle petrol and diesel engines. Electrical Check operation of, diagnose any faults present, and return to original manufacturers’ specification: standard, multi voltage and high voltage systems, inter control module communication systems e.g. CAN, LIN, VAN and MOST networks, multiplex wiring, climate control, cruise control, theft deterrence systems, comfort systems e.g. electric windows and seat / steering adjustment, sunroof, and central locking. Fuel systems Check operation of, diagnose any faults present, and return to original manufacturers’ specification: high pressure petrol injection systems (e.g. GDI and MED Motronic) and high pressure diesel injection systems (e.g. common rail). Transmission Check operation of, diagnose any faults present, overhaul and return to original manufacturers’ specification: manual, automatic or hybrid transmission assemblies. Brakes Check operation of, diagnose any faults present, and return to original manufacturers’ specification: ABS and EHB (Electro Hydraulic Braking) systems. This includes ESP (Electronic Stability Program), TCS (Traction Control System), and ACC (Adaptive Cruise Control) systems. Occupant safety Examine, diagnose any faults present, and return to original manufacturers’ specification: vehicle occupant passive safety systems. This includes airbag, belt tensioner and rollover protection systems. Communication and Information Check operation of, diagnose any faults present, and return to original manufacturers’ specification: in car entertainment systems, telecommunication systems, vehicle information systems e.g. technical monitoring displays and GPS (Global Positioning System). Mobile Air Conditioning (MAC) systems. Discuss and demonstrate best practice for handling of Fgases storage cylinders, the safe recovery and disposal of Fgas. Perform full servicing of an air conditioning system of a motor vehicle to include: leak detection, recovery, vacuum and refill. Common Skills Specialist Skills Servicing Read, interpret and carry out manufacturers’ instructions for all vehicle service, maintenance and repair procedures. Complete a vehicle report form. NCT / DoT VTM Determine the condition of automotive vehicles to NCT / DoT VTM requirements. Engine Diagnose faults and return to original manufacturers’ specification: petrol and diesel engines and their ancillary components. Electrical Read and interpret relevant electrical wiring diagrams. Use fault code reader to interrogate ECU memory and OBD system. Employ a logical and structured fault diagnosis methodology (use of diagnostic flow charts). Measure and interpret quantities of electrical current, voltage and resistance. Diagnose / resolve faults in starter, charging and lighting circuits. Remove / replace vehicle lighting components. Align headlamps. Transmission Diagnose faults and return to original manufacturers’ specification: clutch system components, driveshafts and bearings. Brakes Diagnose faults and return to original manufacturers’ specification: brake friction linings. Steering Diagnose faults and return to original manufacturers’ specification: steering linkage and geometry settings. Bodywork Remove / replace bodywork components e.g. door locks, windows and regulators.
Apprentice Manufacturing Technician
Description At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com . As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: Non-Standard Job Sub Function: Workday Associate A Job Category: Non-Standard All Job Posting Locations: Limerick, Ireland Job Description: About Vision Fueled by innovation at the intersection of biology and technology, we’re developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of vision treatments? Ready to join a team that’s reimagining how vision is improved? Our Vision team solves the toughest health challenges. Help combine cutting-edge insights, science, technology, and people to encourage eye care professionals and patients to proactively protect, correct and enhance healthy sight for life. Our products and services address these needs – from the pediatric to aging eye – in a patient’s lifetime. Your unique talents will help patients on their journey to wellness. Learn more at https://www.jnj.com/medtech We are searching for the best talents for the 2 years Apprentice Manufacturing Technicianroles to be in Limerick, Ireland. As an Apprentice Manufacturing Technician, you will:
Engineering Apprentice
Location: Bulmers Ireland, Clonmel Contract: Full-time Apprenticeship Hours: 39 hours per week Eligibility: Must be 18 years of age or over The Role We are seeking a motivated Electrician Apprentice to join our Engineering & Maintenance team. This role offers hands-on experience in a manufacturing environment while completing a recognised electrical apprenticeship in line with SOLAS/ETB requirements. Key Responsibilities • Assist in the installation, maintenance and repair of electrical systems, machinery and equipment • Support planned preventative maintenance (PPM) activities • Assist with fault-finding and troubleshooting • Follow all electrical safety standards and company procedures • Attend off-the-job training and complete all apprenticeship requirements What We’re Looking For • Must be 18 years of age or over • Leaving Certificate (or equivalent), ideally including Maths • Strong interest in electrical systems and engineering • Good problem-solving skills and safety awareness • Ability to work well as part of a team What We Offer • Fully supported, recognised electrical apprenticeship • Full-time role working 39 hours per week • Competitive apprentice pay and benefits • Mentoring from experienced tradespeople • Strong career progression opportunities within Bulmers Ireland and C&C Group • Shadow experience technicians to gain various experience & knowledge on machines across the site. • Future opportunities to work on shift rota job cycle.
Apprentice Fitter HGV & Apprentice Fitter Plant Machinery
1. The Position The Council is seeking applications from suitably qualified candidates, for a fixed term of four years, for an Apprentice Fitter Construction Plant & Apprentice Fitter HGV based in the Machinery Yard, Dungarvan. 2. Background Our apprentices are trained to the highest possible technical standards and acquire, amongst many other skills, the ability to maintain the various systems associated with modern Public Service vehicles and Construction Plant. This includes training on various day to day repairs and preventative maintenance tasks, in addition to vehicle diagnostics/fault finding with some of the most advanced systems of its kind in place. The apprenticeship normally comprises of seven phases, three off the job and four on the job. During all of these phases you are assessed on a structured ongoing basis. On the job training takes place with Waterford City & County Council during phases 1, 3, 5, 7, and off the job training phase 2, 4, 6 is designated by SOLAS. The successful candidate will be required to register with SOLAS within two weeks of commencement and pass all phases of the apprenticeship programme. The apprentice may be required at the discretion of Waterford City & County Council to undertake addtional training as determined from time to time. 3. Duties Core aspect and duties of the apprenticeship o Learning and developing new craft-related skills, knowledge and competencies. o Repairing plant and equipment both in workshop and onsite. o Working with and learning from experienced Craftspersons and developing o team skills. o Comply with all Health and Safety requirements. o Working with machines and mechanical equipment and a wide range of hand and power tools and measuring devices. o Accepting responsibility for the quality of own work. o Being physically active and work in all weather conditions. o Using the special service tools, materials and equipment. o Reading and interpreting technical instructions and diagrams. o Ability to review and study plant maintenance manuals. o Diagnose and repair mechanical, electrical and electronic systems. o Dismantling, examining and re-assembling mechanical systems and components. o Testing electrical and electronic systems and components. o Record and communicate accurate work records or reports. o Development of good communication skills to ensure accurate information gathering. o Taking responsibility for own learning, including the allocation of study time. o Passing all phase exams ( theory, practicals, skills demonstrations) Other Duties o Carry out the duties & tasks as assigned and supervised by the Fitter Foreman in the Machinery Yard or his nominee. o Carry out house keeping duties such as cleaning and tidying in the workshop area and around the yard depot. o Be responsible for the safe keeping of all store parts and equipment. o Assist in the inspecton of vehicles and plant, and related equipment, determine and carry out necessary maintenance work on vehicles and plant, including, welding, body repair and use of diagnostics equipment. o Assist in the repair work, at off-site locations, including responding to road side breakdowns. o Comply with the Machinery Yards vehicle management system including record keeping and attending training. o Assist in the maintainance of records, on all repairs and work performed. Track service dates, and warranties for all council vehicles, and fully adhere to any management system that is in place. o Comply with the relevant Waterford City & County Council’s Health and Safety management system. The apprentice will be required to complete repairs and maintenance on a wide variety of Construction Plant and equipment including but not limited to the list set out below: HGV Fitter Plant Machinery Fitter Rigid Tipper Lorries Artic Lorries Agricultural Tractors Rollers / Pavers Mobile & Static Tar Tankers Graders Low loader trailers Vans /Jeeps Loading Shovels /Teleporters Other Mechanical Plant Velocity Patchers Manual Patchers Bitumen Sprayers Chip Spreaders Salt Spreaders Snow Ploughs Brine Saturation Stations Winter Maintenance Plant & Equipment Other Mechanical Equipment 4. Qualifications & Requirements of the Post (a) Character Candidates shall be of good character. (b) Age The minimum age at which the employment of an apprentice may commence is 16 years of age. (c) Health Candidates shall be in a state of health such as would indicate a reasonable prospect of ability to render regular and efficient service. Successful candidates will be required to undergo a medical examination carried out by the Council’s Occupational Health Doctor prior to appointment. (d) Education, Experience On the latest date for receipt of completed application forms, candidates shall have obtained the following minimum standards: 1. Grade D in five subjects in the Department of Education & Skills Junior Certificate Examination or an approved equivalent, OR 2. The successful completion of an approved Pre-Apprenticeship course OR 3. Three years’ work experience gained over sixteen years of age in a relevant designated industrial activity as SOLAS shall deem acceptable It should be noted that these are the current approved minimum educational requirements for apprenticeship programmes, however, previous experience of the following subjects would be an advantage but not essential: Mathematics, Technical Drawing/Graphics, Metalwork, Technology and Physics (e) Desirable Skills As an Apprentice you will need to be physically active and be able to work with your hands. An awareness of health and safety and good housekeeping is essential as well as attention to detail. As an Apprentice, the candidate will need: · To be physically fit; · To be able to cope with lifting, bending and stretching; · To have good eye to hand coordination; · To be logical and patient in tracing faults and methodical in organising tasks, especially when taking apart and reassembling machines; · To be able to work at heights (required for certain tasks). 5. Particulars of the Post (a) General Waterford City & County Council proposes to create 2 panels of qualified candidates for the position of Apprentice Construction Plant Fitter & Apprentice HGV Fitter (b) Probation The successful candidate shall be required to be on probation for an initial period, as determined by the Council. (c) Remuneration Remuneration for Apprentice Fitter HGV will be in accordance with Solas apprenticeship programme for the Motor Industry, the weekly rates as set out below are in accordance with the Motor Rates advised by S.I.M.I for – effective from 01 st July 2025. Remuneration for Apprentice Fitter Plant will be in accordance with Solas apprenticeship programme for the Construction Industry, the weekly rates based on 39 hr week as set out below are in accordance with the Construction Rates advised by SEO (Construction Sector) & – effective from 01st August 2025. Phase/Year Gross Wage Norm HGV Gross Wage Norm Plant Phase 2 €251.45 per week €298.97 per week Phase 4 €377.57 per week €488.50 per week Phase 6 €566.34 per week €672.75 per week 4th Year €678.62 per week €807.30 per week For apprenticeships developed before 2016, the employer pays the apprentice while s/he is being trained on-the-job. A training allowance is paid by the local ETB while the apprentice is attending the off-the-job training. This apprenticeship consists of four on-the-job phases (Phases 1, 3, 5 & 7) paid by the employer and three off-the-job phases (Phases 2, 4 & 6) paid by SOLAS. Apprentices will be invited to attend their off-the-job training phases in accordance with the SOLAS scheduling system. On successful completion of the apprenticeship programme, apprentices are qualified to work within the recognised trade or profession. (d) Base The base for the post shall be the Machinery Yard, Dungarvan, Co. Waterford (e) Residence Holders of the post shall reside in the district in which their duties are to be performed or within a reasonable distance thereof. (f) Working Hours / Annual Leave The normal hours of work will be 39 hours per week. The Council reserves the right to alter the hours of work from time to time. The successful candidate may be required to enter into arrangements to work on an on-call rota basis and work out of hours including public holidays. Granting of annual leave, payment for annual leave and arrangements for public holidays will be governed by the provisions of the Organisation of Working Time Act, 1997. Waterford City & County Council’s holiday year runs from 1st January to 31st December. Your holiday entitlement will be 25 working days per annum pro rota (inclusive of Good Friday) Permission and prior authorization is essential before annual leave is taken. The granting of annual leave at any particular time is always subject to the requirements of the council and all annual leave is liable to suspension during periods of exceptional pressure. The final decision in allocating leave rests with Management. (g) Conflicts of Interest The post holder shall not engage in any gainful occupation, other than as an employee of a local authority, to such an extent as to impair the performance of his or her duties as an employee of a local authority or in any occupation which might conflict with the interests of the local authority or which might be inconsistent with the discharge of his duties as a local authority employee. 6. Recruitment Process A. Application Form · Applications must be made on the official application form and all sections of the form must be fully completed. · Please do not submit a CV with your application. Only information contained in the application form will be considered when assessing a candidate’s suitability for the post. · Applications must be submitted as an e mail attachment in either Word or PDF format only by email to recruitment @waterfordcouncil.ie · Applications must be received by the deadline 21st May 2026 at 4.00pm B. Short Listing Candidates may be short-listed for interview on the basis of information supplied. In the event of a short-listing exercise being required, an Expert Panel will convene to examine and assess the application forms against a set of pre-determined criteria, based on the requirements of the job. It is therefore in your own interest to provide a detailed and accurate account of your qualifications and experience on the application form. Where it is considered, by reason of the number and standard of applications received, that it would be reasonable not to admit all candidates to the interview, only persons likely to attain at the interview a standard sufficient for selection and recommendation for appointment shall be called for interview. C. Right to Information and Review - The Council is committed to offering feedback and information to candidates. Any candidate who wishes to do so may request to have a decision or the process reviewed. Any such request must be submitted in writing, stating the grounds of the request and this must be submitted to the Human Resources Department, within five working days of the date of notification of a relevant decision quoting the above reference number.
Civil Engineering Technician Apprentice
PUNCH Consulting Engineers is one of Ireland’s leading and most experienced Civil & Structural Engineering Consultancies. Since 1973, we have grown to be one of the largest Irish-owned consultancies, with vast experience in multi-disciplinary services including Civil, Environmental, Structural, Roads & Bridges, Marine & Energy and Conservation. At PUNCH we Engineer Legacies and are consistent recipients of numerous prestigious Awards across RIAI and ACEI. We have offices in Dublin, Limerick, Cork, Galway and Glasgow, Scotland. As part of our civil or building engineering division you will be a valued member of the teams delivering high profile projects across Ireland. You will develop your skills along with your academic learning to achieve the professional accreditation of a “Higher Certificate in Civil Engineering Level 6” after 2 years, with the opportunity to advance to “Bachelor of Engineering in Civil Engineering Level 7” after 1 further year of work and study. About The Role
ESB Generation & Trading Apprentice
Join Our Team at Ardnacrusha! This is an opportunity to work as part of a leading-edge team in Ireland’s Ardnacrusha hydropower generating station and on the Shannon Scheme. We have been generating electricity on the Shannon since 1929. The station team plays a pivotal role in ensuring Ardnacrusha’s safety, commercial and technical performance is optimised. ESB Ardnacrusha Station has 3 Francis turbines and 1 Kaplan Type Turbine, 4 generators (G1 – G4: rated at 21MW, 22MW, 19MW and 24MW respectively) and responsibility for all the associated dams, weirs, gates, and civil structures associated with the Shannon hydroelectric scheme. ESB is committed to and promotes an open and inclusive culture where everybody has the opportunity to work to the best of their ability and feel part of the team. ESB is inviting those interested to apply for our Apprenticeship (Mechanical Automation and Maintenance Fitting) programme which will commence in September 2026. Our apprenticeship programme will provide you with:
ESB Generation & Trading Apprentice
Join Our Team at Lee Stations! This is an opportunity to work as part of a team in hydro power stations on the River Lee located at Inniscarra and Carrigadrohid, Co. Cork. Built between 1952 and 1957, Lee Generating Stations joined the other schemes on the rivers Shannon, Erne and Liffey to become ESB’s fourth major hydroelectric development. This involved creating two reservoirs in the Lee Valley, which:
Chef De Rang, Experienced Waiter
We are excited to announce this amazing opportunity for an experienced and ambitious individual to join our One Star Michelin Star Restaurant. Ballyfin Demesne proudly holds 3 Michelin Keys for our fabulous property located at the foot of the Slieve Bloom Mountains in Co. Laois. We are also the proud recipient of a Michelin star for our fine dining restaurant headed by our talented chef, Richard Picard Edwards. Our Guest Experience is of the utmost importance at Ballyfin and as such exceptional Customer Service is a must. We are looking for a hardworking individual who has previous experience working in a Michelin-star restaurant. The successful candidate will have a passion for food and beverage, exceptional customer service and teamwork. In turn, we will offer the opportunity to work in a professional, hospitable, and friendly environment with training and development opportunities and great employee benefits. This is a full-time, permanent position, 5 days over 7 days, Monday to Sunday. The position is for our dinner service so the shift will be approximately 3pm to closing. Duties Include (but not limited to:) If you think that you tick all of these boxes, then we want to hear from you! Competitive rates and Excellent Employee Benefits on offer for the right candidate.
