Electronic Security Systems apprentice jobs
Sort by: relevance | dateMotor Mechanics Apprentice
Profile of Craft Core Skills Motor Mechanics The Motor Industry The work of a Motor Mechanic involves the servicing, maintenance and fault diagnosis of automobile and light commercial vehicle mechanical and electrical systems, vehicle component removal, installation or repair according to original manufacturers’ specification. At the end of the apprenticeship, the craftsperson will be able to demonstrate competence in the following skills: Servicing Read, interpret and carry out manufacturers’ instructions for all vehicle service, maintenance and repair procedures. Complete a vehicle report form. Fgas Describe the overall aim of Regulation No. 842/2006 of the European Parliament and of the Council of 17 of May 2006 in relation to the air conditioning systems of automotive vehicles (MACs). List the dangers to personal health and related safety regulations related to the refrigerant gas contained in mobile air conditioning (MAC) systems. Describe the location of possible leaks of refrigerant gas from an automotive air con unit. Engine Diagnose faults, dismantle and reassemble the engine and its ancillary components. Replace timing belts and chains. Use all recommended bolt tightening procedures. Electrical Read and interpret relevant electrical wiring diagrams. Use fault-code reader to interrogate ECU memory and OBD system. Employ a logical and structured fault diagnosis methodology (use of diagnostic flow charts). Measure and interpret quantities of electrical current, voltage and resistance. Diagnose and resolve faults in starter, charging and lighting circuits. Remove and replace vehicle lighting components. Align headlamps. Fuel/Ignition Diagnose and resolve faults in electronically controlled fuel, ignition and emissions control systems. Evaluate exhaust emission levels with reference to NCT/DoT VTM test requirements. Transmission Diagnose faults in manual transmission units. Remove and refit manual transmission units. Diagnose faults in clutch assemblies. Remove and replace clutch components. Remove and replace driveshaft joints and bearings. Brakes Diagnose mechanical and hydraulic faults in the braking system. Remove and replace brake components. Employ manufacturers’ recommended service and bleeding procedures. Core Skills (cont’d) Specialist Skills Steering/Suspension Diagnose faults in steering and suspension systems. Remove and replace steering and suspension components. Align suspension and steering geometry. Balance wheels. Repair punctures. Bodywork Remove and replace bodywork components e.g. door locks, windows and regulators. Engine Carry out complete engine overhaul on automobile and light commercial vehicle petrol and diesel engines. Electrical Check operation of, diagnose any faults present, and return to original manufacturers’ specification: standard, multi-voltage and high voltage systems, inter-control module communication systems e.g. CAN, LIN, VAN and MOST networks, multiplex wiring, climate control, cruise control, theft deterrence systems, comfort systems e.g. electric windows and seat/steering adjustment, sunroof, and central locking. Fuel systems Check operation of, diagnose any faults present, and return to original manufacturers’ specification: high pressure petrol injection systems (e.g. GDI and MED-Motronic) and high pressure diesel injection systems (e.g. common-rail). Transmission Check operation of, diagnose any faults present, overhaul and return to original manufacturers’ specification: manual, automatic or hybrid transmission assemblies. Brakes Check operation of, diagnose any faults present, and return to original manufacturers’ specification: ABS and EHB (Electro-Hydraulic Braking) systems. This includes ESP (Electronic Stability Program), TCS (Traction Control System), and ACC (Adaptive Cruise Control) systems. Occupant safety Examine, diagnose any faults present, and return to original manufacturers’ specification: vehicle occupant passive safety systems. This includes airbag, belt tensioner and rollover protection systems. Communication and Information Check operation of, diagnose any faults present, and return to original manufacturers’ specification: In-Car Entertainment systems, telecommunication systems, vehicle information systems e.g. technical monitoring displays and GPS (Global Positioning System). Mobile Air Conditioning (MAC) systems. Discuss and demonstrate best practice for handling of F-gases storage cylinders, the safe recovery and disposal of F-gas. Perform full servicing of an air conditioning system of a motor vehicle to include: leak detection, recovery, vacuum and refill. Common Skills Specialist Skills (cont’d) Servicing Read, interpret and carry out manufacturers’ instructions for all vehicle service, maintenance and repair procedures. Complete a vehicle report form. NCT/DoT VTM Determine the condition of automotive vehicles to NCT/DoT VTM requirements. Engine Diagnose faults and return to original manufacturers’ specification: petrol and diesel engines and their ancillary components. Electrical Read and interpret relevant electrical wiring diagrams. Use fault-code reader to interrogate ECU memory and OBD system. Employ a logical and structured fault diagnosis methodology (use of diagnostic flow charts). Measure and interpret quantities of electrical current, voltage and resistance. Diagnose and resolve faults in starter, charging and lighting circuits. Remove and replace vehicle lighting components. Align headlamps. Transmission Diagnose faults and return to original manufacturers’ specification: clutch system components, driveshafts and bearings. Brakes Diagnose faults and return to original manufacturers’ specification: brake friction linings. Steering Diagnose faults and return to original manufacturers’ specification: steering linkage and geometry settings. Bodywork Remove and replace bodywork components e.g. door locks, windows and regulators.
Digital Services Apprentice
KEY PURPOSE OF THE JOB To support the Digital and Innovation Officer in the delivery of a number of digital transformation projects across the Council. Apprenticeship schemes are a great opportunity to combine learning, training, and work experience. The post holder will be required to complete a Higher-Level Apprenticeship in Business Technology. As a member of the Innovation Unit, the post holder will be required to: • Work as part of a team, concentrating on IT and Digital Transformation projects and supporting the wider team in project activities. • Provide support for staff across Council sites requiring IT support with digital applications and digitally led projects. KEY DUTIES AND RESPONSIBILITIES Support teams in Lisburn Castlereagh City Council that are participating in a number of transformation projects, including: • Customer Experience Platform • Finance • Waste Operations – Digital Depot • New websites • Planning • Microsoft 365 rollout During your apprenticeship, you will have a minimum of two key areas of work, offering the opportunity to see the breadth of work being undertaken across Lisburn Castlereagh City Council. During this apprenticeship, you will develop a range of skills, such as: • Cyber Security • Process mapping and service design approaches • Making effective use of data • Presenting information in creative and engaging ways • Communication skills • Organisational skills • Agile project management • Website development • Structuring, extracting, and understanding data • Presenting information in creative and engaging ways Support the TPO team in the delivery of specific Digital and Innovation Strategy projects, including documenting sprint meetings and updating project plans. Support the TPO team and Project Managers in the management of data usage across Council digital systems. Liaise with Council Tech Leads and/or suppliers to help ensure the Council’s systems run smoothly. Develop a good understanding of the Council’s digital packages so that problems can be identified at an early stage and logged or resolved with suppliers to minimise disruption to service users. Help configure data contained within the Council’s corporate customer platform and support teams onboarding to the platform where necessary. This may include designing new e-forms and amending existing e-forms within the system. Support the internal communication mechanisms of the Digital and Innovation Strategy. General • Act in accordance with the Code of Conduct for Local Government employees. • Comply with and actively promote the Council’s policies and procedures as directed. • Comply with and actively promote the Council’s policies and procedures on all aspects of Equal Opportunities. • Comply with and actively promote the Council’s Health and Safety Policy and procedures. • Undertake duties in a manner that enhances and protects the reputation and public profile of the Council. • Carry out any other duties that may be allocated from time to time in accordance with the general nature of the post. Note The post holder should be aware that the responsibilities and functional areas of the post may be subject to change as a result of organisational change. The Council therefore reserves the right to change the duties of the post by adding to or amending the range of functional responsibilities. The post holder will be required to be flexible and adaptable to meet the changing needs and requirements of the organisation. Qualifications & Experience It is essential that applicants have a minimum of: Qualifications 1.1 Five GCSEs at Grade C or above, including English and Maths. 1.2 104 UCAS points achieved through the completion of A Levels, National Awards, Access courses, or other approved Level 3 qualifications. Knowledge 2.1 Working knowledge of Windows operating systems and Microsoft Office. Skills 3.1 Good communication and interpersonal skills. 3.2 Good problem-solving skills. 3.3 Ability to work on own initiative.
Label Systems & Process Lead, Year
Label Systems & Process Lead - 2 Year Fixed Term Contract or Secondment Opportunity Location: Craigavon Hours: 37.5 hours per week Business Unit: Clinical Services Open To: Internal Applicants Ref No.: HRJOB11623 Driving the design and evolution of Label Services systems, processes, and automation The Opportunity Clinical Services plays a critical role in supporting global clinical trials by delivering expert services that ensure treatments reach patients safely and efficiently. Within this, Label Services is key to ensuring accuracy, compliance, and consistency in how clinical trial materials are labelled and managed. We’re pleased to offer an exciting secondment opportunity for a Label Technical Lead, where you will act as the technical subject matter expert shaping how our Label Services processes, systems, and technologies are designed and delivered globally. In this role, you will work closely with operational teams and stakeholders to translate real-world challenges into practical technical solutions. You’ll help define how processes and systems should work, ensuring they are efficient, scalable, and aligned with regulatory requirements. In simple terms, this role acts as the bridge between Label Services operations and technical/system solutions, ensuring the tools and processes we use work effectively for the teams who rely on them. Day-to-day, you’ll be involved in: Applicants must have eligibility to work in the UK/IE with no restrictions OR possess a valid work permit that will allow you to take up full time employment in the UK/IE. Further information For further information on essential and desirable criteria, please review the job description attached to the online job posting. Secondment Option - Prior to applying for this secondment opportunity, please discuss with your line manager to ensure that you can be released from your current location for the duration of the secondment should your application prove successful. If you are interested in finding out more or would like to discuss the terms and conditions further, reach out directly to CS CR Label Services Group Manager. How to apply Apply online and tailor your CV to outline how you meet the role criteria. Please upload your CV in PDF format where possible. Closing Date We will no longer be accepting applications after 5pm on Sunday 5th July 2026. RECRUITMENT AGENCIES PLEASE NOTE: Almac will only accept applications from agencies/business partners that have been invited to work on this role by our Talent Acquisition team. Speculative candidate CVs received or submitted directly to Hiring Managers will be considered unsolicited and no fee will be payable. Thank you for your cooperation.
Civil Engineering Apprentices
SECTION 1: OVERVIEW With a minimum of 3,000 new civil engineers needed to ensure the successful delivery of Project Ireland 2040, the National Development Plan 2026–2035 and Climate Action Plan 2025, an alternative delivery model for civil engineering needed to be developed to entice stronger uptake of the profession. As a profession listed on the critical skills occupation list, additional approaches for recruitment in this field are needed to address challenges in the public sector. To aid in this objective, the technological university sector has engaged with the local authority sector to develop a programme where new entrants to engineering disciplines can gain suitable academic qualifications while also engaging in workplace-based learning. Cork County Council in partnership with Munster Technological University (MTU), is offering an opportunity for a civil engineering apprenticeship. This structured apprenticeship program leads to a Level 6 qualification after two years, with the opportunity to progress to Level 7 with one additional year of study. There is also a potential pathway to Level 8, offering a full progression route in civil engineering. This is an exciting new initiative, creating an alternative career path to the civil engineering profession in Ireland based on an earn and learn model. The civil engineering apprenticeship programme is planned to be transformational, and, over time, bridge the shortfall in supply of engineers in Ireland, providing those skills critical to the delivery of Project Ireland 2040. Designed to develop the skills, knowledge and competencies to meet the future needs of the industry, this programme will appeal to those seeking to build a career in civil engineering. SECTION 2: THE ROLE This apprenticeship would suit candidates with a strong interest in civil engineering, construction and infrastructure. The role provides an opportunity to combine structured academic study with practical, on-the-job learning in a local authority environment. Civil engineering apprentices will be assigned to the Capital Delivery Directorate, Housing Directorate, Planning & Environment Directorate or Roads, Transportation & Area Services Directorate. SECTION 3: TASKS / RESPONSIBILITIES The post holder may be required to perform other tasks/responsibilities as deemed appropriate by the relevant mentor or Director of Service. Additionally, apprentices will attend on-campus labs/workshops in MTU one full day (8 hours) every three weeks. During the period between June and August each year, when there are no online lectures or on-campus labs/workshops, the working week is a 35-hour week , Monday to Friday from 9:00 a.m. to 5:00 p.m. All hours worked will be subject to the provisions of the Organisation of Working Time Act, 1997 and the Organisation of Working Time Act (Regulations) 2001 . SECTION 9: ANNUAL LEAVE The annual leave entitlement will be 22 working days per annum . Cork County Council's leave year runs from 1 January to 31 December . The granting of annual leave at any particular time is always subject to the requirements of the Council and all annual leave is liable to suspension during periods of exceptional work pressure. Granting of annual leave, payment for annual leave and arrangements for public holidays will be governed by the provisions of the Organisation of Working Time Act, 1997 (as amended) .
Business Systems Specialist
Business Systems Specialist Location: Craigavon, Northern Ireland Hours: 37.5 hours per week: Monday – Friday Business Unit : Pharma Services Open To : Internal and External applicants Ref No.: HRJOB11651 Who we are: With over 55 years’ experience, Almac Pharma Services is an established, reliable and world leading outsourcing partner to the global pharmaceutical and biotechnology industry. The company provides tailored, quality-led and timely solutions from early and late phase pharmaceutical development, clinical and commercial drug product manufacture, product launch through to commercial packaging and global distribution. The Role: The Business Systems Specialist provides functional support for business systems globally, resolving technical, user and design issues, conducting acceptance testing, and ensuring business readiness. They will act as Business Champion for the ERP system, resolve functional issues, find suitable solutions and identify future enhancements in line with business processes. What you will need to be successful: Eligibility to work in the UK OR possess a valid work permit that will allow you to take up full time, permanent employment in the UK. Applicants should hold a third-level qualification in a business, technical, scientific, or communications discipline, and/or demonstrate substantial experience in developing and enhancing computerised systems within a pharmaceutical setting, as well as in designing business systems that address organisational needs. Strong problem solving, interpersonal, and communication skills are required, along with the ability to organise, plan, and prioritise tasks in a busy role. We would welcome applications from recent Graduates who are keen to develop their career in the Pharmaceutical Industry. Further Information For more information on the role responsibilities and the essential and desirable criteria, please review the job description attached to this job posting. This role will represent all Pharma Services sites across the UK and USA and will require some international travel and coverage beyond normal working hours on a regular basis. It is a condition of your employment that you are able to fulfil this requirement of the role. How to apply Apply online and tailor your CV to outline how you meet the role criteria. Please upload your CV in PDF format where possible. Why Build your career at Almac? A fantastic salary and benefits package is available, including annual bonus, generous holiday allowance, healthcare reimbursement scheme, and a rewarding role where your work contributes to the advancement of human health. At Almac, our people are at the heart of everything we do. Your future matters — and our approach is simple: we support, develop and reward our people, build fulfilling careers and together we advance human health. Find out more about our Support, Develop, and Reward initiatives here: https://www.almacgroup.com/careers/life-at-almac/ Closing Date We will no longer be accepting applications after 5pm on Friday 3rd July 2026. RECRUITMENT AGENCIES PLEASE NOTE: Almac will only accept applications from agencies/business partners that have been invited to work on this role by our Talent Acquisition team. Speculative candidate CV’s received or submitted directly to Hiring Managers will be considered unsolicited and no fee will be payable. Thank you for your cooperation.
Security Personnel
Main Purpose of the Role The purpose of this role is to provide support to Store Management and colleagues in all aspects of the Security function. The Ideal Candidate Will Have/Be: • Previous experience within a retail security role. • Hold a current PSA Security Guard Licence (essential). • Excellent communication and customer service skills. • Excellent interpersonal skills. • Ability to work on own initiative as well as part of a team. Main Duties: • Actively live SuperValu brand values, i.e. Genuine, Passion for Food, Vibrant, Committed, Innovative and Imaginative. • Protect the Store's assets. • Assist the Store Owner/Manager in preventing loss of stock and theft within the store. • Ensure that the Store is a safe environment for customers and employees. • Key holding responsibilities, including opening and closing of the Store. • Carry out routine spot checks on waste, deliveries, closing stock, refunds, voids and employees. • Carry out investigation work, when required. • Monitor CCTV records.
Accountant, Finance Systems - Hybrid
Permanent Full-Time Remote Work Option Hybrid Category Finance Accountant Location County Dublin, Ireland Job Details Background We are at the heart of Ireland’s energy transition - connecting, operating and transforming the electricity grid to support a low carbon, renewable future. We are building talented teams that tackle real world challenges every day and help us to achieve our goal to prepare the grid to carry up to 80% of Ireland’s electricity from renewable sources. We are proud to be a certified Great Place to Work, recognised for our culture built on trust, collaboration and inclusion. At EirGrid you will find supportive teams, opportunities to grow and meaningful work. We also offer secure employment with a range of flexible and family friendly working policies to support your life and wellbeing. If you want to know more about what EirGrid has to offer you, visit If you are ready to make an impact and grow your career in a purpose-led organisation, your journey starts here. Job Purpose The Finance Systems Accountant plays a key role in ensuring that EirGrid’s finance systems are robust, well-governed, and aligned with regulatory and business requirements. The role is responsible for both the ongoing management and continuous development of finance systems, ensuring they remain fit for purpose as business needs evolve. This includes managing system configuration, master data, and core finance structures, as well as overseeing system upgrades, releases, and enhancements in a controlled and effective manner. The role also takes ownership of identifying, troubleshooting, and resolving system defects, working closely with IT and vendors to maintain system stability and data integrity. Operating as the interface between Finance, IT, and the wider organisation, the Finance Systems Accountant ensures that financial data is accurate, complete, and auditable, enabling best-in-class financial and regulatory reporting that meets the requirements of all stakeholders. In addition, the role supports enhancement of system capability, driving automation, and standardising finance processes. The Finance Systems Accountant plays an active role in the development and delivery of the Finance Systems roadmap, ensuring that system investments are aligned with strategic priorities and deliver tangible business value. Key Responsibilities Closing date for applications 03/07/2026
Mechanical Automation and Maintenance Fitting Apprentice
First Year Apprentice Vacancy Buttimer Engineering are a diversified engineering company, specialising in bulk materials handling systems and high-quality steel fabrication serving clients in Ireland, the UK and beyond. We operate across a range of industries such as Pharma, Food and Data Centres, providing design, fabrication, procurement, installation, maintenance, project management and engineering services. Based in Tipperary, Ireland since 1978, the Company’s people, values and culture have been instrumental in the success of the business to date. What makes us different is that while we continue to grow our business we have still maintained that small company feel to our culture which enables us to ensure that our employees are always front and centre in everything we do. We are currently looking to hire Mechanical Automation and Maintenance Fitting Apprentices to join our experienced team. As an Apprentice you will be guided and supported and will get the opportunity to work on leading-edge projects across our sectors to deliver excellence to our clients. Candidates must; If you are interested in this role, please apply by sending your CV to Human Resources hr@buttimer.com
Motor Mechanics Apprentice
Main Purpose of Job: At Connolly Motor Group we are one of Irelands No.1 Aftersales Dealers for Audi, Volkswagen, Mercedes-Benz, SEAT, Cupra, Hyundai, Volvo and MG with sites in Ballina, Sligo, Galway and Letterkenny. Due to expansion and as part of our Apprenticeship Programme we are currently interested in recruiting 1st year Service Apprentices within Motor Mechanics to join our growing team in Mercedes-Benz Galway. The role: The apprenticeship offered will be for a 4-year period and will involve both on the job and off the job training. On successful completion of your apprenticeship, you will receive a nationally and internationally recognised FETAC Level 6 Craft Certificate. The person: Skills and Competencies: • Minimum SOLAS entry requirements is essential • Leaving Certificate with a pass in Ordinary level Maths is essential • Ability to work in a team • Ability to work on own initiative • Display a keen interest in Motor Vehicles • Interested in working in a fast-paced environment • Attention to detail is fundamental to ensure quality is consistently delivered • Continuous improvement mindset • Full Clean Drivers license We understand the importance of investing in our apprentices, we provide a fully equipped toolbox to the value of €3,000, training and development, uniforms, working with world class brands, employee assistance programme, career progression post apprenticeship, further education and other benefits. If you are driven, customer focused, with a continuous improvement mindset we would be interested to hear from you.
Horticulture Apprentice
Overview: Join our team at Duckett’s Grove House and Walled Gardens as a Horticulture Apprentice. This position offers a unique opportunity to learn and develop skills in a historic and beautiful setting. Responsibilities: Assisting with the cultivation and maintenance of plants, fruit, flowers, and trees within the Walled Gardens. Learning about and participating in garden design, planting, and care under the guidance of experienced head gardener. Participating in the upkeep of the grounds, including weeding, watering, and general grounds maintenance. Engaging with visitors to provide information about the gardens and horticultural practices. Qualifications: A passion for horticulture and a desire to learn and develop skills in a hands-on environment. Strong work ethic and willingness to take on a variety of tasks related to garden maintenance and care. Ability to work effectively both independently and as part of a team. Excellent communication skills and a friendly, approachable demeanour when interacting with visitors. Benefits: Hands-on training and mentorship from experienced head gardener. Opportunity to develop practical skills in a historic and picturesque garden setting. Potential for growth and advancement within the organisation for individuals demonstrating exceptional dedication and skills. To Apply: Please submit your cover letter expressing your interest in the horticulture apprentice position at Duckett’s Grove House and Walled Gardens. R93 RF80
