Manufacturing Technician apprentice jobs
Sort by: relevance | dateLabourer and Apprentice Stone Mason
Stone Mason Labourer / Apprentice Wanted We are looking for a reliable Labourer and Apprentice Stone Mason. The roles are ideal for someone who: This is an opportunity to learn a skilled, in-demand trade from the ground up. Wages based on experience, with room to grow as skills develop. If you are interested in either of the above positions please call G Stone Construction Ltd on 0867882676 or upload your CV by hitting the APPY NOW button.
Executive Technician Architectural
The duties of the post of Executive Technician Architectural will depend on placement of the post, but in general they will include but are not limited to: · They will lead the coordination of Architectural Projects from Housing, to Civic, 3D, Mapping and Housing. · They will organise the procurement, appointment and coordination of external consultants to work with ‘in-house’ Architects. · They will organise the external Architect Led - design teams procurement, appointment and coordination of their work. · Have a thorough knowledge and capability in the use of 3D revit and be able to detail buildings at all stages from sketch design through to tender. · Have an in-dept understanding of the preparation of detailed design and contract documents for the tender process and ideally in connection with public works contracts · Demonstrate experience in the preparation of presentation drawings in support of Planning Submissions · Have a good working knowledge and understanding of relevant legislation, regulations, policies and statutory technical standards that govern the Local Authority · Have a thorough knowledge of the Irish Building Regulations, associated Technical Guidance Documents and the Health & Safety Regulations in relation to building design and construction · The role will include the requirement to attend site, carry out inspections or surveys and prepare reports as required · Liaise with and co-ordinate in-house architectural staff and external design team consultants engaged by Galway City Council · Demonstrate experience in the successful delivery of detailed production information on a substantial range of projects, including housing within a tight programme · Estimating project technical or resource requirements · Working as part of a multidisciplinary team · Liaising with other departments, members of the public and external agencies including representing the Council at a variety of meetings · Working effectively with the Elected Members and Council staff towards the successful and speedy implementation of designated projects · Preparation of public consultation display material and assistance at public consultations · Managing work files and providing progress reports · Supervision of staff/projects assigned to him/her · Contributing to individual staff development, personal development and demonstrate a commitment to personal and team development initiatives · Assisting with any office management tasks which may be assigned from time to time The above specification is not intended to be a comprehensive list of all duties involved and consequently, the post holder may be required to perform other duties as appropriate to the post which may be assigned and to contribute to the development of the post while in office. ESSENTIAL QUALIFICATIONS FOR THE POST 1. Character Candidates shall be of good character. 2. Health Each candidate must be in a state of health such as would indicate a reasonable prospect of ability to render regular and efficient service. 3. Citizenship : Candidates must, by the date of any job offer, be: i. A citizen of the European Economic Area (EEA). The EEA consists of the Member States of the European Union, Iceland, Liechtenstein and Norway; or ii. A citizen of the United Kingdom (UK); or iii. A citizen of Switzerland pursuant to the agreement between the EU and Switzerland on the free movement of persons; or iv. A non-EEA citizen who is a spouse or child of an EEA or UK or Swiss citizen and has a stamp 4 visa; or v. A person awarded international protection under the International Protection Act 2015 or any family member entitled to remain in the State as a result of family reunification and has a stamp 4 visa or vi. A non-EEA citizen who is a parent of a dependent child who is a citizen of, and resident in, an EEA member state or the UK or Switzerland and has a stamp 4 visa 4. Education, Training, Experience, etc. Each candidate must, on the latest date for receipt of completed application forms: a) Hold at least an Ordinary Bachelor’s Degree (Level 7 or higher on the National Framework of Qualifications (NFQ) in Architectural technology or a related discipline to the Council’s satisfaction b) Have at least five years satisfactory relevant experience having attained a qualification as an Architectural Technician or Architectural Technologist c) have a wide knowledge of all the technical aspects of local authority work and also a deeper knowledge of at least one section of the work, d) possess adequate training and experience relating to dealings with other departments within their own organisations and with other bodies, And e) have adequate experience in the supervision and control of staff. *Non-Irish Qualifications must be accompanied by a determination from Quality and Qualifications Ireland (QQI) to establish their comparability against the Irish National Framework of Qualifications, overseas qualifications must also be accompanied by a translation document. Desirable: It is desirable that candidates should have the following: · 5 years relevant experience in an architectural design office · Worked on quality housing projects · Understanding of the Department Housing Manual and other relevant guidelines · Good understanding of Health and Safety requirements in the Construction industry · Have a Safe Pass · Clear understanding of compact growth, NDP, Climate Change, Environmental protection · High quality detailing · Hold a full unendorsed valid Irish /EU licence, for Class B vehicles, or a licence acceptable to NDLS for transfer to full Irish licence Note: Candidates may be asked to present a portfolio of their work during the interview to demonstrate their understanding of the role. Each candidate must include on the application form details of all qualifications obtained by them. The invitation to attend for Interview is not to be regarded as an admission that you possess the prescribed qualifications and/or requirements for this post or are you qualified by law to hold the post. Documentary proof will be required before appointment where you claim credit for particular qualification, experience, etc. COMPETENCIES FOR THE POST Key Competencies for the post are given in the table below. Candidates will be expected to demonstrate sufficient evidence within their application form and at interview of competence under each of these headings. Management & Change · Understand the need for change and get this across persuasively to others. · Make a positive case for change and elicit commitment from others. · Implement change in an orderly and determined manner Delivering Results · Translate the business/team plan objectives into clear priorities and actions for their area of operation. · Help establish high quality service and customer care standards. · Convert operational objectives into specific work plans, programme activities and schedules, taking into account the broader operation plan when setting priorities. · Allocate resources (staff and equipment) across jobs to ensure that priorities are met and that work is executed in the most efficient manner possible to deliver quality work and services. Performance Through People · Lead the team/service area in a manner that provides clarity of purpose and a focus on delivery. · Show visible commitment to the purpose, mission and vision of the organisation. · Provide a positive sense of purpose for the team in terms of its contribution to the organisation’s objectives. · Develop the team and its members to achieve corporate objectives through the effective management of performance. · Have effective written and verbal communication and interpersonal skills. Personal Effectiveness · Is enthusiastic about the role and motivated in the face of difficulties and obstacles · Remains calm under pressure and has the ability to manage the delivery of several tasks/projects concurrently · Manages their time effectively, focusing on essential tasks and responsibilities · Is open to take on new challenges or responsibilities · Keeps up with current and emerging developments, trends and best practice in this area. Candidates will also be assessed at interview on the basis of how they demonstrate their Knowledge, Experience and Skills. Knowledge, Experience & Skills · Knowledge and understanding of the structure and functions of local Government. · Knowledge of current local government issues. · Understanding of the role of an Executive Technician (Architectural) · Knowledge and experience of operating ICT systems. PRINCIPAL CONDITIONS OF SERVICE Type of Post Future relevant permanent and temporary posts will be filled from the panel(s) formed. The post(s) will be whole-time, permanent/temporary and pensionable. Remuneration The annual salary is as follows: €52,440 - €62,740 per year IMPORTANT NOTE: Candidates should note that the starting salary is not subject to negotiation . Entry into the pay scale above the minimum point will only apply to existing public servants in the context of the relevant Government Pay Circulars. Candidates who are not covered by such Circulars will enter the pay scale at the minimum point i.e.€52,440. The rate of remuneration may be adjusted from time to time in line with Government pay policy. The holder of the office shall pay to the local authority any fees or other monies (other than their inclusive salary) payable to and received by them by virtue of their office or in respect of services which they are required by or under any enactment to perform. Probation: (a) there shall be a period after such appointments take effect during which such persons shall hold the position on probation, (b) such period shall be 12 months but, the Chief Executive may at their discretion extend such period, (c) such persons shall cease to hold the position at end of the period of probation unless during such period, the Chief Executive has certified that the service of such persons is satisfactory. Hours of Duty The person appointed will be required to work a 35 hour week. The successful candidate will be required to log their hours of work in accordance with the requirements of the Organisation of Working Time Act, 1997 and will be required to co-operate with the use of technologies to record such hours. Annual Leave: The annual leave entitlement will be 30 days per annum. Residence: Holder of the post shall reside in the district in which their duties are to be performed or within a reasonable distance thereof. Work Permit All non-EU/EEA citizens must hold a valid work permit prior to and for the duration of their contract. The work permit must allow you to work full time for Galway City Council. It is the responsibility of individual employees to ensure that you have a valid work permit. If at any stage during your contract you cease to hold a valid work permit you must immediately advise Galway City Council and your employment will cease with immediate effect. Outside Employment: The position is whole-time and the employee may not engage in private practice or be connected with any outside business which would interfere with the performance of official duties.
QC Technician
Job Overview The QC Technician will be responsible for assisting in daily laboratory tasks, aiding the Quality Control Team. It will be the Technicians responsibility to oversee the calibration/verification of laboratory equipment on a daily basis. The technician will be expected to assist QC analysts with preparation of chemicals and reagents necessary for analytical assessment. On occasion it will be a requirement that the QC technician carry out raw material analysis including but not limited to wet chemistry and/or HPLC/GC. The QC technician will also be expected to assist in the preparation and organization of department documentation.The working hours for this position are Monday to Friday 6am-2pm. Main Tasks/Activities: Duration: Full time, Permanent Location: Newry Additional Information: Applicants should be able to provide proof that they have a right to work in the UK at the time of their application. Applicants who are unable to provide this proof will not be considered. We regret that applications received after the closing date and time will not be accepted. Benefits: Free life assurance Company pension scheme Healthcare cash plan 32 days annual leave Wedding leave Company sick pay Employee well-being initiatives Employee assistance programme On-site free parking Subsidised canteen facilities WeCare programme – supporting the local community Employee perks scheme Employee recognition scheme Career development opportunities Contact: recruitment@norbrook.co.uk Norbrook Laboratories Limited employs a workforce with members of all sections of the community and is committed to appointing people purely on the basis of merit. In accordance with our equal opportunities policy, we would particularly like to welcome applicants from the Protestant Community.
Apprentice In Social Work
Job Title, Grade Code Apprentice in Social Work (Grade code: 6020) Location of Post It is anticipated that there will be a total of 20 Apprentices employed by the HSE on the 2026. Apprentice in Social Work Programme. There are currently 11 locations confirmed and these are based in the following locations: Informal Enquiries Please email you query to hseapprenticeships@hse.ie and a member of the HSE Apprenticeship Team will be in contact.
Carpentry & Joinery Technician
Location of Post Dublin College Dún Laoghaire Salary Scale €41,215 p.a. - €71,528 p.a. Long service Increment 1, €73,913 after three years satisfactory service at the maximum. Long Service Increment 2, €75,466 after three years satisfactory service at LSI 1 New appointees to any grade start at the minimum point of the scale. Incremental credit is normally granted on appointment, in respect of current experience in the Civil Service, Local Authorities, Health Service and other Public Service Bodies and Statutory Agencies. Working Week 39 hours per week (exclusive of one hour lunch) Annual Leave 27 working days per annum. Probation In accordance with S.I. No. 686/2022 - European Union (Transparent and Predictable Working Conditions) Regulations 2022, the period of probation shall not exceed 12 months. Superannuation Membership of the ETB Superannuation Scheme and of the ETB’s Spouses and Children’s Scheme is automatic and compulsory. Equality, Diversity & Inclusion In accordance with ETB’s commitment to equality of opportunity for all job applicants, you are asked to request any reasonable accommodation in sufficient time to ensure you can participate fully in the recruitment process. Please contact recruitment@ddletb.ie should you require any assistance. Job Objectives Overview of the Role To provide organisation, preparation and machining of materials for classes and the maintenance of health and safety standards of machines and equipment within the workshops and machine shop as directed by the Principal in line with practices and procedures of DDLETB. Duties and Responsibilities
Lab Technician
Tirlán, is a world-class food and nutrition co-operative, with a diverse portfolio of quality ingredients, leading consumer and agri brands. Tirlán owns leading brands such as Avonmore, Kilmeaden Cheese, Millac, Solmiko, Truly Grass Fed, Premier Milk, Wexford, mymilkman.ie and GAIN Animal Nutrition. We nurture a talented team across Ireland, the US, MEA and China, delivering annual revenues of over €3 billion, and over 2,300 people to manage our network of 11 processing plants and 52 agri branches. Our purpose is to nourish the world, while safeguarding our environment for future generations. Role Summary We have an opportunity for a Laboratory Technician at Tirlán Virginia on a fixed term contract basis.The position will report to the QC Manager and will be primarily based in the chemical and physical testing laboratory with cover for other laboratory activities on site. The role will involve testing at all stages of production – raw materials, in-process and finished goods. This position is part of the laboratory shift rota covering seven days per week. Key Responsibilities About us Through our expertise in research and development, customer insights, food safety and state-of-the-art manufacturing we bring innovative food and nutrition solutions to a global market. Our new and vibrant headquarters in Kilkenny City operates as a collaboration hub where multi-functional teams come together in a hybrid work environment. Commitment to Diversity & Inclusion We believe in the value of difference. We know that different perspectives, life experience and backgrounds can drive innovation and deliver growth. We welcome people from all walks of life without regard to race, colour, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, or disability status. Join our Talent Pool Considering a new career in Tirlán but this isn’t the role for you? Join our talent community and sign up for job notifications at www.tirlan.com/careers Tirlán is a Values Based Organisation
Vehicle Body Repairs Apprentice
The repair and/or replacement, alignment and welding of vehicle body panels and structural members. At the end of the apprenticeship the Craftsperson will be able to demonstrate competence in the following: Core Skills • Metal fabrication • Welding • Panel repairs • Vehicle body alignment • Vehicle refinishing • Plastic repairs • Glazing • Workshop practices Specialist Skills • Metal fabrication • Welding • Panel repairs • Vehicle body alignment • Vehicle refinishing • Plastic repairs • Glazing • Workshop practices Common Skills • Metal fabrication • Welding • Panel repairs • Vehicle body alignment • Vehicle refinishing • Plastic repairs • Glazing • Workshop practices Personal Skills • Communications • Customer relations • Ability to work as a team member • Ability to work independently • Problem solving • Adaptability
Wood Manufacturing and Finishing Apprentice
Roscar Furniture – Marble & Granite are looking for an Apprentice to join their team in Causeway, County Kerry. This position will give carpenters the opportunity to work within an experienced team while gaining experience working on both residential and commercial jobs. Applicants will be exposed to, thought and gain experience using: - Handtools and powered hand tools -Workshop machinery like Panel saws, Mitre saw, edgebanders, planers and Drumsanders - Those interested in CNC manufacturing have the opportunity to learn and train how to use one of our 5 CNCs. Applicants must have: * Ability to take instruction * Driven and willing to learn * Proactive and proven ability to work on own initiative * Strong problem-solving skills and attention to detail. * Be open to occasional travel for fitting of residential and commercial jobs
Heavy Vehicle Mechanics Apprentice
First Year Apprentice HGV Mechanic for immediate start. Kinahan Commercials Ltd. is a Mercedes-Benz Dealer based in Moate, Co. Westmeath. This is a great opportunity for a school leaver who wishes to pursue a career in a fast moving industry. Full Solas Training along with Mercedes-Benz Training. What does a Heavy Vehicle Mechanic do? As a heavy vehicle mechanic, you will carry out routine servicing and repair on commercial vehicles such as trucks, vans, trailers, jeeps, buses and coaches. Your work will involve servicing, diagnostics and repairs. As well as routine servicing, major overhauls are undertaken at regular intervals. Faults are diagnosed and you will repair or replace the defective components as necessary. You will manage the mechanical, electrical/electronic, hydraulic and pneumatic aspects of the vehicle.
M.A.M.F. Apprentice
Larry Byrne Engineering Ltd are currently looking for one candidate to enrol in our apprenticeship program. This is a full time position and is based in New Ross Co Wexford. ABOUT THE COMPANY Larry Byrne Engineering Ltd is a leading engineering company who specialise in the design and manufacturing and repairs of livestock bodies, drag trailers and all commercial bodies. We are a small company with ten staff, working together. APPRENTICESHIP PROGRAM Larry Byrne Engineering Ltd we offer a wide range of training programmes, working on different machinery, vehicles and plants. The apprenticeship consists of four on the job phases with Larry Byrne Engineering Ltd and three off-the job training phases in accordance with Solas scheduling system. WHAT IS A MECHANICAL AUTOMATION & MAINTENANCE FITTER The work of the M.A.M.F involes machinery installation, machinery assembly, maintenance and repairs, replacement of broken or worn parts, adjustment and servicing. The work also involves fabrication, using machine tools, ie: Lathe, Milling Machine, Grinders etc.. All M.A.M.F apprentices will be trained in the following, working with a variety of specialised tools- Lathe, Milling machine, Grinders, working with drilling and milling machines and welding plants, working on complex hydraulic systems, interpreting technical drawings, assembling new machinery, dismantling, repair/make & fitting of new parts, machine wiring, electrical machine components installation and report writing of completed work. PAY We pay all our apprentices the recommended wage set by the ETB. Review it after 3 months (A well adjusted candidate will be offered above the recommended wage,) A training allowance is paid by the local ETB while the apprentice is attending the off-the job training. REQUIREMENT Junior Certificate must be completed Must be 16 years old or older Good communciation skills Ability to work as part of a team, to enrol in our apprenticeship programme. This is a full time position and is based in New Ross Co. Wexford
